Search

The article to study the texture of paper, in the composition of which the cellulose pulp from the inner layer of mulberry branches bark is added, studies the paper’s absorbency and sorption properties. The absorbency of the paper was determined by the volume of water absorbed by the paper surface while wetting one side of the test sample. It was found that the addition of cellulose pulp from the inner layer of mulberry branch bark to the cotton paper pulp contributes to the strengthening of the structure which is confirmed by the values of mechanical strength and surface absorbency during one-side wetting with water. To study the physical structure of a paper sheet water vapor sorption was investigated in a high-vacuum sorption plant with mercury valves and quartz balances. On the basis of S-shaped sorption isotherms it is determined that the paper sample where the composition contains only cellulose pulp from the inner layer of the mulberry branches bark has the highest sorption properties which indicates the presence of disordered amorphous areas where the accessibility for water molecules is higher. It has been established that in order to obtain paper the structure of which ensured selective absorption of low-molecular fluid it is enough to add 10–20% of cellulose pulp from the inner layer of mulberry branches bark to the paper pulp; and further addition will result in misalignment of the paint contour during printing due to significant deformation of paper size.

The article gives the consideration to the properties of paper with the addition of pulp mass from the waste of the pharmaceutical industry, namely licorice root after removing extraction. Licorice roots were dried to air-dry state after extraction, cleaned of wastes and cut into fragments 10–30 mm long, then subjected to pulping with 2–4% NaOH solution at a hydro module 1 : 5, at a temperature of 95–98 °С for 60–90 minutes. After washing with hot water, they are bleached in an alkaline medium with a solution of hydrogen peroxide at a consumption of 3–4% of the mass of absolutely dry cellulose, hydro module 1: 5, temperature 70–95 °C for 60–90 minutes. After washing, grinding to a gristing degree of ~60°ShR, prepared castings weighting 80–90 g/m2 on a leaf-casting mashine. Physical, mechanical and optical properties of experimental castings are determined. Revealed that the addition of malt mass of the cotton contributes to the formation of dense orderly structures of the paper sheet, as short fibers of licorice filled the gaps between the long fibers of cotton pulp, thereby reducing the pore volume and reactive surface availability and receipt paper with the highest mechanical strength. Adding malt mass to cotton mass at a ratio of 10 : 2 is optimal, further replenishment contributes to an increase in sorption absorption, that is, to obtain paper with a porous structure, which is not desirable for high-quality reproduction.